Makita EK 7301

MAKITA EK 6101

The MAKITA EK 73010 Powerhead delivers with faster starting, more power, and improved fuel economy. The EK7301 has a 4.5 cu.in. (73 cc) engine with 5.1 HP (maximum horsepower) and a no-load speed of 9,350 RPM to take on the most demanding applications. The ignition coil with the start-support function stores electrical power with each pull for easier start-ups. It’s engineered for reduced flooding with a carburettor that includes improved deco-valve and metering spring for precise fuel regulation at startup. The EK7301 also features more efficient fuel consumption with an SLR muffler that recycles unburned fuel vapour for reduced scavenging losses and 15% improved consumption.

The EK7301 also features a five-stage foam-paper-nylon air filter system with advance directional air flow that provides cleaner air for better saw performance and easy filter cleaning and replacement.

Features
Specifications

Features

Improved decompression valve and metering spring for precise fuel regulation at startup
Start capacitor with start support function resulting in significantly less pull start force
On-Off-Choke operation switch on a single lever for operator convenience
Five stage filtration system with advanced directional air flow provides cleaner air for better saw performance
Starter grip decompression valve for faster starting
Improved ignition system with the large flywheel and rare earth magnets create more efficient power.
Reinforced aluminium blade guard with 70 degrees range of limitless positioning using a marked knob handle

Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
Microchip controlled carburettor designed to compensate engine timing according to workload
Aluminium guard and wheel pressure plates to reduce weight
2-mass dampening system engineered to provide reduced vibration to the operator
SLR Muffler recycles un-burned fuel vapour for reduced scavenging losses and up to 15% improved fuel consumption

Specifications

Total Weight With 400mm Bar	16.5 kg
Total Weight With 500mm Bar	17.0 kg
Engine Type	2-Stroke
Engine (max power)	5.1 HP/3.8 kW
Bore	1.97 (50) in (mm)
Stroke	1.46 (37) in (mm)
Displacement	4.5 (73) cu in (cm3)
Max. Torque	4.3 Nm
Idling Speed	2,500 rpm
Clutch Engagement Speed	3,800 rpm
Max. Engine Speed	9,400 ± 145
Max. Spindle Speed	4,300 rpm
Fuel Type	Mix Unleaded + 2-Stroke oil
Mixture Ratio	50:1
Sound Pressure Level
Sound Power Level (Kwa=2)
Vibration Acceleration Rear Handle Bench Tested (K=2)
Vibration Acceleration Tubular Handle Bench Tested (K=2)
Vibration Acceleration Field-Tested Handheld (K=2)
Vibration Acceleration Field-Tested GeolCart Handle (K=2)
Fuel Consumption at Max. Load	1.7kg/h
Fuel Tank Capacity	1.1L
Oil Tank Capacity	N/A
Drive Belt Part Number
Spark Plug and Gap	NGK BPMR 7A / BOSCH WSR 6F / CHAMPION RCJ 6Y
Chain Speed at Max. Spindle rotation
Chain Break-Out Force

*Specifications are subject to change without notice.